*
Configure your PC with a static IP address between 192.168.1.2 and 192.168.1.254. E. g. 192.168.1.2 (gateway and DNS is not required).
*
Download the openwrt-wrt54g-squashfs.bin firmware image to your PC
*
Execute the TFTP commands (the commands are for Linux) below:
tftp 192.168.1.1
tftp> binary
tftp> trace
tftp> put openwrt-wrt54g-squashfs.bin
*
Plug the power on and the TFTP transfer should start immediately
*
Wait 2 minutes. The router will reboot itself automatically after the upgrade is complete.
*
You are done! You should be able to telnet to your router (IP address: 192.168.1.1) and start configuring.
Configure your PC with a static IP address between 192.168.1.2 and 192.168.1.254. E. g. 192.168.1.2 (gateway and DNS is not required).
*
Download the openwrt-wrt54g-squashfs.bin firmware image to your PC
*
Execute the TFTP commands (the commands are for Linux) below:
tftp 192.168.1.1
tftp> binary
tftp> trace
tftp> put openwrt-wrt54g-squashfs.bin
*
Plug the power on and the TFTP transfer should start immediately
*
Wait 2 minutes. The router will reboot itself automatically after the upgrade is complete.
*
You are done! You should be able to telnet to your router (IP address: 192.168.1.1) and start configuring.
